Cart

Your Cart is Empty

Back To Shop

Cart

Your Cart is Empty

Back To Shop
Sale

DenCo 12V 5.5Ah Flat Pack LiFePO4 Battery

Original price was: $104.99.Current price is: $84.99.

Whether it’s powering a QRP transceiver, or a 50W VHF/UHF mobile transceiver, this is the battery for you!

This unit is a 12-volt 5.5 amp-hour custom hand-built DenCo Battery comprised of four 32650 LiFePO4 cells and a DenCo/Daly common port 20A BMS.

Out of stock

Categories: ,

This is a the mainstay DenCo Batt: A 12.8-volt 5.5 amp-hour custom hand-built DenCo 4S Lithium Iron Phosphate battery. The cells were sourced directly from LiFePO4 cell suppliers and tested/verified in-house. This battery uses a DenCo common port 20A BMS (battery management system). The DenCo provides short-circuit protection, overcharge protection, over-discharge protection, over-current protection, and charge passive cell balancing. These cells are capable of 18A continuous discharge, 60A pulse peak discharge, and the BMS is capable of 20A discharge. This is a powerhouse in a little package.

It has passed quality control testing for charge/discharge cut-off and delivers 5.5+ amp-hours in our tests.

This battery has a single Anderson Powerpole 30A connector for output and input (charging). It is a flat battery pack that works best in scenarios where the battery is in a pocket or compartment out of sight. It has no further buttons, ports, or displays that can be accidentally pushed while stowed away.

It is best used with QRP (low watt) radio transmitters, but can go up to 18 amps in current for powering mobile and portable QRO rigs. The battery was designed by DenCo primarily as a companion battery to portable VHF mobile radio deployments, but can be used for all sorts of other devices that need 12-13 volts of consistent reliable power. Recommended consumption rate is around 6 to 12 amps.

Cell Specifications:

  • 71 watt-hours capacity
  • Nominal voltage: 12.8 volts
  • Charge 14.6V 6A max
  • Discharge 18A max
  • Cycle life: 1C 100% DOD ≥2000 cycles, resulting in 80% capacity afterward
  • Discharge operating temperature -4 to 140°F (-20 to 60°C)
  • Charging operating temperature 32 to 140°F (0 to 60°C)
  • Storage temperature -4 to 113°F (-20 to 45°C)

BMS Specifications:

  • Brand: DenCo/Daly 4S Common Port LiFePO4 BMS
  • Discharge 20A max
  • Charge 10A max (but do not exceed cell specification of 6A)
  • Balance current 30mA ±5
  • Short circuit detection delay 250 µS
  • BMS power consumption 100µA

Due to lithium battery shipping restrictions, this item only ships to the continental United States.

 

Weight 1.5 lbs
Dimensions 5.5 × 2.8 × 1.75 in

Cart

Your Cart is Empty

Back To Shop